Lee 223 Remington Case Length Gage and Shellholder

Lee 223 Remington Case Length Gage and Shellholder

Be the first to review this product

Out of stock

$5.95

Quick Overview

The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer.

Lee 223 Remington Case Length Gage and Shellholder

The Lee Case Length Gage is a precise and easy way to trim brass cases to length and square the case mouth. Requires a Lee Cutter and Lock Stud to function.

After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.

The first step to successfully trimming brass cases with the Lee Case Length Gage and Shellholder is to take the Lee Lock Stud (sold separately) and screw it into the shell holder. Next the Length Gage needs to be screwed into the Case Trimmer Cutter (sold separately). The length gage is set to cut each case within SAAMI specifications. After the tools are screwed together the next step is case trimming. Just put the empty brass into the shellholder, insert the case length gage into the empty piece of brass and turn the cutter until the piece of brass is trimmed to the predetermined length.

Technical Information

Material: Hardened Steel
Features: Caliber specific Shellholder and length gage
Notes: Cutter and Lock Stud Sold Separately (See Related Items Tab)
Product #: 90114
Special Note: The Large Cutter and Lock Stud is required for .475 and larger calibers (Sold Separately)

Manufacturer Lee
Manufacturer Part Number 7.34308E+11
Cartridge 223 Rem
Shell Holder Caliber specific Shellholder Included

Reviews

Write Your Own Review